Re: bizhub 754e B/W
The metal plate the separation assy is mounted too. No images can not help you with that.
bizhub 754e B/W
Collapse
X
-
Re: bizhub 754e B/W
You can try and mod the exit area with some sort of "feeler" hanging from the top but it probably won't help if the originals are too "wobbly".
Another thing you can try is to scan the originals SEF and see if this works better.
I don't know if KM offers some sort of "silent" mode to reduce the speed wich probably would help reducing your issue.Leave a comment:
-
Re: bizhub 754e B/W
Where are these boards that I can bend in that area? Can I have a picture pleaseLeave a comment:
-
Re: bizhub 754e B/W
There is a pressure adjustment that has like 3 settings or continuous on some you can play with too. The sheet metal in that area can bend, that will give you endless hell.Leave a comment:
-
-
-
-
Re: bizhub 754e B/W
You can try and mod the exit area with some sort of "feeler" hanging from the top but it probably won't help if the originals are too "wobbly".
Another thing you can try is to scan the originals SEF and see if this works better.
I don't know if KM offers some sort of "silent" mode to reduce the speed wich probably would help reducing your issue.Leave a comment:
Leave a comment: