c250i. STRB is damaged recover help~

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xender79
    Technician
    • Nov 2009
    • 47
    #1

    c250i. STRB is damaged recover help~

    hello..


    c250i. STRB is damaged




    I was looking for a way to recover STRB with an English translator, but the English translation was wrong.
    I connected the STRB to the computer and deleted it.


    Is there any way to recover the formatted STRB again?
    Tags: c250i, damaged, english, recover, strb
    • femaster
      Service Manager

      1,000+ Posts
      • May 2011
      • 1482
      #2
      Re: c250i. STRB is damaged recover help~

      Put it back into the machine, Boot directly into a USB flash drive with current firmware on it. Allow the firmware update to run. Once updated, reboot and you should eventually be prompted to "recover data". Choose to recover data and it should be back up and running, with only minimal settings loss.
      A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
      My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

        Comment

        • xender79
          Technician
          • Nov 2009
          • 47
          #3
          Re: c250i. STRB is damaged recover help~

          Error code D010 is output and there is no recovery message. No access to service mode, no counter touch.

          Originally posted by femaster
          Put it back into the machine, Boot directly into a USB flash drive with current firmware on it. Allow the firmware update to run. Once updated, reboot and you should eventually be prompted to "recover data". Choose to recover data and it should be back up and running, with only minimal settings loss.

            Comment

            • femaster
              Service Manager

              1,000+ Posts
              • May 2011
              • 1482
              #4
              Re: c250i. STRB is damaged recover help~

              Give this a go, see if it gets you anywhere.
              Attached Files
              A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
              My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

                Comment

                Previous template Next
                Working...