Bizhub c7000 Fuser

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • wjurls
    replied
    Re: Bizhub c7000 Fuser

    Check the connectors on the back for burnt pins and/or damage. Make sure none of the thermostats are open as well. This is all assuming that the lamps ohm out ok.

    Leave a comment:


  • CopyTech03
    started a topic [Misc] Bizhub c7000 Fuser

    Bizhub c7000 Fuser

    Have a c7000 where the fuser has drive, but the upper and lower lamps do not come on. Customer has another fuser that works in the same machine so know it's not a board. Any ideas?
Working...