di 2010 tech rep mode

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • euro scott
    Trusted Tech
    100+ Posts
    • Apr 2008
    • 127

    di 2010 tech rep mode

    i recently took over service on a di 2010. the machine appears to be in great shape, but when i try to enter tech rep. there is a password. of course the customer has no idea what it is. is there any default password that will work, or a way to reset this? thanx
  • rebt101

    #2
    Di2010 tech rep

    Utility, Meter Count, Stop, 0, 0, Stop, 0, 1

    Comment

    • euro scott
      Trusted Tech
      100+ Posts
      • Apr 2008
      • 127

      #3
      after i tech. rep a password screen pops up. is there a default password?

      Comment

      • rebt101

        #4
        Di2010

        I'm not sure what screen you are in but most passwords for this series were either 1,2,3,4,5,6,7,8 or 0,0,0,0,0,0,0,0

        Comment

        • euro scott
          Trusted Tech
          100+ Posts
          • Apr 2008
          • 127

          #5
          ok, thanx

          Comment

          • euro scott
            Trusted Tech
            100+ Posts
            • Apr 2008
            • 127

            #6
            still no luck with those passwords. is there any type of hard reset on the main board?

            Comment

            • newbie
              Technician
              50+ Posts
              • Feb 2008
              • 62

              #7
              touch "end" when you enter the 8 digits on the touchscreen

              Comment

              Working...