AA on Fiery

[artivity]

hi i would ask about code error "AA" on my fiery
I've IC-413 (Fiery E100 70-60C-KM)
The machine control panel initially displays a message that the "controller is not connected" and the LED on the fiery displays AA after starting up.
I have replaced HDD and RAM and try to clean up by blower but stays like that for more than an hour. i didnt install system software via USB or LAN because i dont understand hw to do it, has anyone seen and resolved this issue?

[Synthohol]

Re: AA on Fiery

here ya go.
ive done the lan way hundreds of times, the usb method only once, i dont like it. i like to see the progress on my laptop as the system is installed.

[artivity]

Re: AA on Fiery

here ya go.
ive done the lan way hundreds of times, the usb method only once, i dont like it. i like to see the progress on my laptop as the system is installed.

THANK you Synthohol, i'll follow step by step from your file, instal direcly by lan. i'll keep post for progress here.

[Synthohol]

Re: AA on Fiery

flip both switches,on fiery and click on "installer.vbs" in the root of the system disk.
just follow the prompts on the laptop.
when done it does take like 15-30 min before fiery is ready to be found with CWS and configured.

thats for the XP version 1.0
if your fiery version is different there is another disk i dont have.

either LAN port should work, ive had better luck with the top port but YMMV, try the regular lan port first.

[artivity]

Re: AA on Fiery

flip both switches,on fiery and click on "installer.vbs" in the root of the system disk.
just follow the prompts on the laptop.
when done it does take like 15-30 min before fiery is ready to be found with CWS and configured.

thats for the XP version 1.0
if your fiery version is different there is another disk i dont have.

either LAN port should work, ive had better luck with the top port but YMMV, try the regular lan port first.

I got something problem, i dont see setup.exe also i dont see "installer.vbs on aplication, what i see only "FIERY_OS_INSTALLER_SETUP" but type of application is "XML".
what should i do, need your advice Synthohol.

[Synthohol]

Re: AA on Fiery

that does not look like the ver 1.0

[artivity]

Re: AA on Fiery

flip both switches,on fiery and click on "installer.vbs" in the root of the system disk.
just follow the prompts on the laptop.
when done it does take like 15-30 min before fiery is ready to be found with CWS and configured.

thats for the XP version 1.0
if your fiery version is different there is another disk i dont have.

either LAN port should work, ive had better luck with the top port but YMMV, try the regular lan port first.

that does not look like the ver 1.0

take a look on my hdd external, be right back

[artivity]

Re: AA on Fiery

that does not look like the ver 1.0

Gambar WhatsApp 2023-05-22 pukul 23.45.16.jpg

thats on my fiery, ver.1 wasn't??

[Synthohol]

Re: AA on Fiery

thats what it left the factory with.
your pic of the disk you posted i think is 1.1 which is an upgrade.
does that fiery have 2 sticks of ram?
the original config had just 1 stick.
if you have 2 it may have been upgraded and i can only help with 1.0
or yours is not for the 413 at all.

[artivity]

Re: AA on Fiery

thats what it left the factory with.
your pic of the disk you posted i think is 1.1 which is an upgrade.
does that fiery have 2 sticks of ram?
the original config had just 1 stick.
if you have 2 it may have been upgraded and i can only help with 1.0
or yours is not for the 413 at all.

yes it does, 1GB-1GB
but dealer said it was 413 (my ex.dealer can't handle it because terminate of contract klick)
so what supposed I do??

[Synthohol]

Re: AA on Fiery

install ver 1.0
it still works, hell i have 2 working 413s in my basement i just play around on remotely because XP is nostalgic
CWS helps too especially to configure it.

[artivity]

Re: AA on Fiery

install ver 1.0
it still works, hell i have 2 working 413s in my basement i just play around on remotely because XP is nostalgic
CWS helps too especially to configure it.

should I remove 1 stick of RAM if i downgrade to ver 1.0 ???
And could you please let me know where can I downlod it .ISO file for ver 1.0??

[Synthohol]

Re: AA on Fiery

nah, always leave the ram.
as far as the download konica does not offer it anymore but a few of us have a copy for contributors to this site.
just saying

[artivity]

Re: AA on Fiery

nah, always leave the ram.
as far as the download konica does not offer it anymore but a few of us have a copy for contributors to this site.
just saying

thanks,I just found out about "copytechnet", usually I contribute in kaskus and facebook forum. thank you for all of your advice