Bizhub: light lines, bars on low intensity Black prints. [see scans]

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MonksServant
    Junior Member
    • Nov 2023
    • 5

    Bizhub: light lines, bars on low intensity Black prints. [see scans]

    I've solved the C,M problems from this thread: https://www.copytechnet.com/forums/k...see-scans.html
    by replacing the transfer belt.

    However, what I've found now are those lighter stripes that show up on Black toner prints. What you're seeing here is a 50% black color.
    With 100% color only the uppermost line is barely visible.
    doc01531920231201130059_001.jpg

    I have two B drums for comparison and both drums show the same lines in the same places. So, I guess it won't be the drum.
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7574

    #2
    Re: Bizhub: light lines, bars on low intensity Black prints. [see scans]

    Did you clean the laser by wand? Sometimes it is even advisible to remove laser unit(PH unit by KM) from machine in order to clean it properly.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • MonksServant
      Junior Member
      • Nov 2023
      • 5

      #3
      Re: Bizhub: light lines, bars on low intensity Black prints. [see scans]

      Originally posted by tsbservice
      Did you clean the laser by wand? Sometimes it is even advisible to remove laser unit(PH unit by KM) from machine in order to clean it properly.
      Yupp. You got it right, sir. Thank you very much.

      What it was, was some very stubborn dirt that I had to clean several times (around 20x).
      Also, I've used a micro-fibre cloth wrapped around the wand and I'm seeing an immense progress.
      There is still one line so I might need to remove the laser unit, as you've proposed.

      Thanks again.
      All the best

      Comment

      Working...