C-3350i, squeaking from exit section...

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Oystercopy
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2009
    • 623

    #1

    C-3350i, squeaking from exit section...

    I know this has been posted before, and I read up on that. But this one might need to have the exit section pulled out (not looking forward to it) because I can't see how to get to the rollers/bushings that may be squeaking without removing that assembly.

    However, if someone has done it on this series, please let me know how difficult it was to do on this unit.

    Thanks,
    OC
  • Max
    Senior Tech

    500+ Posts
    • Oct 2011
    • 551

    #2
    Re: C-3350i, squeaking from exit section...

    Looks worse than it is. Twenty min job. Best to take it out and lube ever so lightly. Or go nuts and spray the shit out of it with wd40 ( not recommended)

    Comment

    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7963

      #3
      Re: C-3350i, squeaking from exit section...

      OC happy holidays will need to go back to the office and send you PM.
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      Working...