Bizhub C250i annoying noise

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • KMFLT3CH
    replied
    Re: Bizhub C250i annoying noise

    Originally posted by mandongo
    Thanks for the reply!
    Sorry to ask maybe a stupid question, but I didn't understand where exactly to apply the lubricant - on the rollers, on the shaft under every roller, or in the ends of the shaft?
    For this particular model line, the shaft where the lower idler rollers ride. The ones along the bottom in my video. If you run the exit rollers like mentioned you can lubricate them and work it in.

    Leave a comment:


  • kingarthur
    replied
    Re: Bizhub C250i annoying noise

    Originally posted by mandongo
    Thanks for the reply!
    Sorry to ask maybe a stupid question, but I didn't understand where exactly to apply the lubricant - on the rollers, on the shaft under every roller, or in the ends of the shaft?

    I normally strip the unit down completely and lubricate everything

    Leave a comment:


  • copytechtrouble
    replied
    Re: Bizhub C250i annoying noise

    Originally posted by mandongo
    Hello friends!
    I have one Bizhub C250i with strange noise (mouse like).

    Can someone tell me what can cause this sound and how to get a rid of it?
    Thanks in advance!
    the exit rollers can be responsible as well as the waste toner hopper.
    in the case of the hopper, apply PTFE lubricant to these areas
    Screenshot_20240403_090319_Photos.jpg

    Leave a comment:


  • Synthohol
    replied
    Re: Bizhub C250i annoying noise

    everywhere in red gets a drip of tufoil lubeit-8 with a needle applicator from me.
    Attached Files

    Leave a comment:


  • mandongo
    replied
    Re: Bizhub C250i annoying noise

    Originally posted by KMFLT3CH
    It's the exit rollers.

    i-Series noisy exit rollers
    Thanks for the reply!
    Sorry to ask maybe a stupid question, but I didn't understand where exactly to apply the lubricant - on the rollers, on the shaft under every roller, or in the ends of the shaft?

    Leave a comment:


  • KMFLT3CH
    replied
    Re: Bizhub C250i annoying noise

    It's the exit rollers.

    i-Series noisy exit rollers

    Leave a comment:


  • Duplicator
    replied
    Re: Bizhub C250i annoying noise

    When it's squeaking, does it stop when you open the front door?

    Leave a comment:


  • mandongo
    started a topic [Misc] Bizhub C250i annoying noise

    Bizhub C250i annoying noise

    Hello friends!
    I have one Bizhub C250i with strange noise (mouse like).

    Can someone tell me what can cause this sound and how to get a rid of it?
    Thanks in advance!
Working...