AccurioPrint 2100 J3114

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • elmaligno
    Expert technician KM

    250+ Posts
    • Oct 2009
    • 250
    #1

    AccurioPrint 2100 J3114

    Hi colleagues, I just installed an AccurioPrint 2100 and every 200-300 prints it tells me J3114. As I say the machine is new and it does it to me from any of the paper drawers. I don't have much experience with this model, any advice to check?
    Thanks in advance
    Field technician since 1994
    Tags: accurioprint, advance, drawers, j3114, paper
    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7629
      #2
      Re: AccurioPrint 2100 J3114

      Hi,

      Cause
      A file system error has occurred due to HDD data corruption.
      Damaged data could be written to the HDD.
      • This error causes J-3114 and C-6720 due to the delay in the communication of Mis-Centering.
      • OACB can be the cause of the error since HDD is connected to OACB.
      Workaround
      Please try the following steps:

      • Perform I/O check 99-92 -(File System Initialization)
      • Perform HDD format
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.
        😀 1

        Comment

        • elmaligno
          Expert technician KM

          250+ Posts
          • Oct 2009
          • 250
          #3
          that was the solution
          Field technician since 1994

            Comment

            Previous template Next
            Working...