c252 mainmotor

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JSC
    replied
    Every time i have had this code ( 4 times ) its been down to the main motor ( m1 ) it takes about 45min to 1 hour to fit.

    Leave a comment:


  • sairam
    replied
    252 mainmotor

    ok ,I will go through u r soltion .what will be the problem in the motor.just know deep.and any body can tell the cost of motor assembly

    Leave a comment:


  • ni311
    replied
    How can you tell it is the control board faulty and not the motor? I never heard someone bothering fixing the motor, everyone is just replacing it, including me.

    Leave a comment:


  • sairam
    replied
    thanks

    thanks for u r sugettion.I cross cheaked with devoloping motor.then problem shifted therecode hase come that c2255.but c5201 code was gone
    as u told main motor has tobe replace.but is there any chance to repair main motor control board (its with main motor).

    Leave a comment:


  • Mercutio Norway
    replied
    C252 Mainmotor Failure

    Sorry to be the bringer of bad news, but you have to replace the main motor. As I can remember it's about an hour or so work...
    You have to remove the main control board to get access to the engine.

    Leave a comment:


  • sairam
    started a topic c252 mainmotor

    c252 mainmotor

    hello friends,
    I got a PROBLEM WITH MAIN MOTOR in c252.code is c5102.so wht i have to do
Working...