Di-450, with Pi-5500, scan manual

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3273

    Di-450, with Pi-5500, scan manual

    Customer like to have a manual with settings to be done to use the scan function of the Di-450. I explained him several times but he still likes to have an "official manual" for this.

    The wanted information is not included in the normal user manual, I recall that I have seen a special user manual for this. Could not find it at KonicaMinolta's website.

    Anybody know where to get it? English language would be fine.

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "
  • albasoul06

    #2
    Service & Support | Konica Minolta Business Solutions, U.S.A., Inc.

    Comment

    • Hansoon
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Sep 2007
      • 3273

      #3
      Thanks. I've looked there before but there's not this particular manual nor any instruction sheet how to use the scan function for a Di-450 with Pi-5500.
      There's only one for the Pi-5501

      Hans
      " Sent from my Intel 80286 using MS-DOS 2.0 "

      Comment

      • albasoul06

        #4
        Service & Support | Konica Minolta Business Solutions, U.S.A., Inc.

        Comment

        • albasoul06

          #5
          select print controller... not Di 450

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3273

            #6
            Yes, I knew that but thanks anyway. Only the Webinterface has a manual there. I'm (my customer is) looking for which buttons on the copier are to be used and what settings in the display.

            Hans
            " Sent from my Intel 80286 using MS-DOS 2.0 "

            Comment

            Working...