C6500 ADU rebuild

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dogsbody
    Trusted Tech

    250+ Posts
    • Jun 2007
    • 288
    #1

    C6500 ADU rebuild

    Hi all,
    After some advice, tomorrow I have to rebuild the ADU on my C6500, I was there this afternoon but didn't give myself enough time to get the job done.
    Does anyone have any tips on the best way to get at and change all the adu rollers.
    Cheers.
    The force will be with you always.
    Tags: adu, c6500, rebuild
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4305
      #2
      Never did it on the C6500, but if it's anything like the 7075, it should be easy to exchange the rollers - just a matter of taking out the frontside ballbearings and get the rollers out through the hole - no need to go messing on the backside. But, again, I never did it on that particular machine, so...
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • HORSE
          Trusted Tech

          100+ Posts
          • Mar 2008
          • 186
          #3
          Originally posted by dogsbody
          Hi all,
          After some advice, tomorrow I have to rebuild the ADU on my C6500, I was there this afternoon but didn't give myself enough time to get the job done.
          Does anyone have any tips on the best way to get at and change all the adu rollers.
          Cheers.
          Have done it a few times myself
          Laughing......

            Comment

            Previous template Next
            Working...