c450 network problem
had an it guy go to the network settings and input ip address had him turn off machine when turned back on network never came back. can't even find the controller in system 2. any help please
-
-
How long did you leave the machine for? Sometimes it takes a while for the Controller Detail and Network Tabs to appear after changing settings. -
its been a couple of days.Comment
-
At first, I'd guess you'd need to reinstall the Fiery software, but if you can't find the controller setting in service mode, things get tricky...
So, I'd first try a firmware upgrade (or reflash, if it already had the latest version). Then, if the Controller option reappears, check if you have "Controller 1" selected for the Fiery (the internal controller is "Controller 0").
Good luck!' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
Comment