Konica 7272 sc 23-04

[Naveed Shahid]

Hello Every One

I am facing a problem sc 23-04 i changed already pcl but cant solve problem can any one have a idea

thanks in advance

[leo]

Measure the ICP(small black IC)fuses on printercontrol-board
i belive one of them are faulty. just soldier an normal glass fuse over the ICP
check the servicemanual for the current

[Naveed Shahid]

helo leo

dear leo

i already open th printer control board but i can't found icp or fuses co can u give a fever confirm me ic name or fuse name i reaaly appciate u
thanks

Measure the ICP(small black IC)fuses on printercontrol-board
i belive one of them are faulty. just soldier an normal glass fuse over the ICP
check the servicemanual for the current

[leo]

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

[Naveed Shahid]

konica 7272 23-04

thanks for great support i will fininshed problem soon

thanks once again

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

[chand]

Re: konica 7272 23-04

thanks for great support i will fininshed problem soon

thanks once again

hi
did you solve the problem???

[leo]

Re: Konica 7272 sc 23-04

Diego Silva, Great player

[chand]

Re: Konica 7272 sc 23-04

no problem of any board...i solve this problem easily..only hardware problem
contact me chand226@gmail.com

[chand]

Re: Konica 7272 sc 23-04

you can find 3 of them in lower right corner(see att. picture) as an example.
there is a lot of them over the whole card.
PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

no problem of any board

[rhalif]

Re: Konica 7272 sc 23-04

I have the same error sc 23-04 with dialta 5510, I tried to change the pcl but it didnt work, I checked also the 3 icp, they all look good, anyone can help me with this ?