Konica 7272 sc 23-04

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • rhalif
    Guest replied
    Re: Konica 7272 sc 23-04

    I have the same error sc 23-04 with dialta 5510, I tried to change the pcl but it didnt work, I checked also the 3 icp, they all look good, anyone can help me with this ?

    Leave a comment:


  • chand
    replied
    Re: Konica 7272 sc 23-04

    Originally posted by leo
    you can find 3 of them in lower right corner(see att. picture) as an example.
    there is a lot of them over the whole card.
    PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

    no problem of any board

    Leave a comment:


  • chand
    replied
    Re: Konica 7272 sc 23-04

    no problem of any board...i solve this problem easily..only hardware problem
    contact me chand226@gmail.com

    Leave a comment:


  • leo
    replied
    Re: Konica 7272 sc 23-04

    Diego Silva, Great player

    Leave a comment:


  • chand
    replied
    Re: konica 7272 23-04

    Originally posted by Naveed Shahid
    thanks for great support i will fininshed problem soon

    thanks once again
    hi
    did you solve the problem???

    Leave a comment:


  • Naveed Shahid
    replied
    konica 7272 23-04

    thanks for great support i will fininshed problem soon

    thanks once again




    Originally posted by leo
    you can find 3 of them in lower right corner(see att. picture) as an example.
    there is a lot of them over the whole card.
    PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.

    Leave a comment:


  • leo
    replied
    you can find 3 of them in lower right corner(see att. picture) as an example.
    there is a lot of them over the whole card.
    PCL is connected to with connector 206 on top of the card, pin 17 and 18, so you can follow the "print-lines" if you have eyes.
    Attached Files

    Leave a comment:


  • Naveed Shahid
    replied
    helo leo

    dear leo

    i already open th printer control board but i can't found icp or fuses co can u give a fever confirm me ic name or fuse name i reaaly appciate u
    thanks




    Originally posted by leo
    Measure the ICP(small black IC)fuses on printercontrol-board
    i belive one of them are faulty. just soldier an normal glass fuse over the ICP
    check the servicemanual for the current

    Leave a comment:


  • leo
    replied
    Measure the ICP(small black IC)fuses on printercontrol-board
    i belive one of them are faulty. just soldier an normal glass fuse over the ICP
    check the servicemanual for the current

    Leave a comment:


  • Naveed Shahid
    started a topic Konica 7272 sc 23-04

    Konica 7272 sc 23-04

    Hello Every One

    I am facing a problem sc 23-04 i changed already pcl but cant solve problem can any one have a idea

    thanks in advance
Working...