Konica Minolta bizhub 252 is not loaded to the system at startup

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • LinART
    • Jul 2025
    #1

    [Dead] Konica Minolta bizhub 252 is not loaded to the system at startup

    Konica Minolta bizhub 252 is not loaded to the system at startup. The screen shows a clock, then fades out the screen. I suspect that the problem with NVRAM. Now I want to write the firmware from the CF ... But I can not find it. Anyone can send an e-mail admin@sadmin.org firmware for 252p, for example, 4038-F000-G00-K0-300_CHECKSUM-6452 (Phase 3.05)? Or NVRAM recovery firmware bizhub C250/C252: 20070301_4038-F000-GCN-G4-000 (2000), Checksum: 16E6.EXE. Thank you.
    Tags: 200, 2000, 300, 452, 645, 7030, act, admin, bizhub, bizhub c250, bizhub c252, c250, c252, e-mail, email, firmware, konica, konica minolta, mail, minolta, recovery, screen, send, shows, startup, sys, system
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Try a trouble reset first. Turn the machine on while holding down the Utility key.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • LinART
          #3
          Originally posted by RRodgers
          Try a trouble reset first. Turn the machine on while holding down the Utility key.

          It did not help.

            Comment

            • xsstaff
              #4
              hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!

                Comment

                • LinART
                  #5
                  Originally posted by xsstaff
                  hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!
                  I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM

                    Comment

                    • radew
                      #6
                      Konica C252 nvram problem

                      Dear All,

                      I also have the similar problem and been trying to program the copier without any success despite with the technician from the local copier company ..

                      I will be grateful if someone could give me a pointer ?

                      Cheers,
                      Mao

                        Comment

                        • Naveed Shahid
                          Trusted Tech
                          Site Contributor
                          100+ Posts
                          • May 2008
                          • 162
                          #7
                          Re: Konica Minolta bizhub 252 is not loaded to the system at startup

                          Originally posted by LinART
                          I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM
                          can u send me solution i am also facing same problem

                          thanks
                          naveed
                          toshiba_estudio@yahoo.com

                            Comment

                            • ozkan
                              Junior Member
                              • Feb 2018
                              • 7
                              #8
                              Re: Konica Minolta bizhub 252 is not loaded to the system at startup

                              Hi I have the same problem, but I couldn't find the firmware. Any suggestions?

                                Comment

                                Previous template Next
                                Working...