My team is faced with flashing close to 1000 KM 650/353/203s to modify the IU life spans. Most of us have 1 CF card for color and 1 for B&W but we need to get 8 cards working for each tech (8 X 15 ) to make the proces go faster. Here's the issue... the damm flash cards suck!!!. Out of 150 bought from E-Bay and a dozen or so from KM only 2 have been able to accept the firmware and flash the MFPs without an "invalid card error". None of the cards have been formatted (at least as far as Windows is concerned). I have a HEX editor and have tried to erase the cards per the procedure put out by KM but still no success. Does anyone have a relaible method to format the CF cards to vxworks, and although the firmware imaging toolkit has a "format as vxworks" icon, this is greyed out and I have no idea how to enable it. The specs on the cards is San Disk or Transcend 128 MB. Any thoughts? Thanks Emujo
CF cards for KM color MFPs
Collapse
X
-
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals. -
My team is faced with flashing close to 1000 KM 650/353/203s to modify the IU life spans. Most of us have 1 CF card for color and 1 for B&W but we need to get 8 cards working for each tech (8 X 15 ) to make the proces go faster. Here's the issue... the damm flash cards suck!!!. Out of 150 bought from E-Bay and a dozen or so from KM only 2 have been able to accept the firmware and flash the MFPs without an "invalid card error". None of the cards have been formatted (at least as far as Windows is concerned). I have a HEX editor and have tried to erase the cards per the procedure put out by KM but still no success. Does anyone have a relaible method to format the CF cards to vxworks, and although the firmware imaging toolkit has a "format as vxworks" icon, this is greyed out and I have no idea how to enable it. The specs on the cards is San Disk or Transcend 128 MB. Any thoughts? Thanks EmujoComment
-
I've been using a 128mb verbatim card now for c203/650 series for a few years now.. there's firmware out to minimize the iu life message to nothing but an oil can indicator on the control panel... gonna try it maybe tomorrow.
Regards!
A.Comment
-
I am currently using a 128MB for the entire line of MFPs I mentioned above, and have had no issues. 256 may work, but I don't know. The firmware is to allow the MFP to operate past the IU life limit w/o displaying the replace IU message. Only released last month. Does not affect 652/C360 family as this ability is built into the software switches. If I put the firmware on my CF card (been using the same one for almost 2 years), no problems. So I know it is a CF card issue, not the f/w toolkit, or a firmware issue. EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.Comment
-
Looks like I found a way to make this work...don't want to make it public until I verify with KM that the procedure dosen't wind up inducing some other wierd problem, but if you are at a stand still like I was, PM me and I'll explain the process. PS this also makes CF cards that originally were used for B&W usable. EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.Comment
-
What firmware version are you guys talking about ? first I've heard our company I work for goes through a sack full of chips be a nice a fix for us.
Found it listed under : DLBT1000576EN01
Firmware released : 09/04/10
Does anyone know of something similar or if this sw is already unlocked for current models c280 c451 etc ?Comment
-
I've used crucial 256 without issue.
Just be sure to never format the cards if you get them new. Let the firmware imaging program do its own thing.
And this illustrates my point to another guy who suggested buying off of ebay. Not always the best approach."Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Comment
-
don't know what the big deal is, I've never had any issues with cf cards. I've formated them for temporary storage of mp3s off my computer in the past then reused them the next day without issues in firmware imaging tool kit and subsequent upgrade.
Maybe I'm just lucky.Comment
-
You don't see it unless you have access to the UK KMBS suport site. As it is released to other regions it will be added as a download. EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.Comment
-
I have had luck copying an existing working CF card to one which was purchased new. I can't recall the software, but it was something that did a sector by sector copy, not a file copy as in explorer. This would copy the vxworks format over to the new card, and then you can use the KM Firmware Imaging Toolkit to write updated firmware to the card.Comment
Comment