KonicaMinolta Bizhub 160 and alike, IU recognition.
Often these machines do not recognize the IU (T/C) because of the flimsy terminal contacts in the machine.
Here's a mod to get rid of this problem forever.
Remove all contacts and than solder a 1kΩ resistor to bridge both of the outer terminals as shown in the picture.
Hans
Often these machines do not recognize the IU (T/C) because of the flimsy terminal contacts in the machine.
Here's a mod to get rid of this problem forever.
Remove all contacts and than solder a 1kΩ resistor to bridge both of the outer terminals as shown in the picture.
Hans
