Help! KM Bizhub C253 error code C-0204

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lastdays
    #1

    [Error Code] Help! KM Bizhub C253 error code C-0204

    Hello

    I still receiving this error message and I cannot print. I already checked tray 2 and is clean and ok. I`m using A3 paper for newspaper in this tray. Anybody can help me please?
    Tags: ali, bizhub, bizhub c253, c253, code, error, error code, error code c-0204, error message, failure, lift motor, message, paper, paper feed tray, prcb, print, sea, tray
    • big jase
      Service Manager

      Site Contributor
      100+ Posts
      • Jul 2008
      • 136
      #2
      0204

      this code is lift error in tray 2 , have you checked behind the tray to see if any paper is there stoping the lift moter
      If at First you don't succeed remove all evidence of ever trying!

        Comment

        • albasoul06
          #3
          C0204 (C-0204) at power up.

          CAUSE: Tray 2 elevator failure. Bent mounting bracket for the paper tray lift motor (M8).
          SOLUTION: Remove Tray 2 paper cassette. Inspect the M8 mounting bracket toward the right/rear of the tray cavity to ensure that the metal tab is parallel to the bottom of the tray cavity. Reform the tab and secure in place.

          CAUSE: Poorly seated connectors or failed PRCB.
          SOLUTION: Thoroughly inspect the paper feed tray 2 lift-up motor (M9) connectors. Also check the connector for the paper feed tray 2 upper lift sensor (PS15). The I/O mode can be used to confirm the functionality of PS15. Reseat all connectors on the PRCB. Ensure that all pins for CN7 and CN9 of the PRCB are properly aligned and securely attached. Replace the PRCB (# A02E H001 06) .

            Comment

            • ndlovu
              Technician
              • Nov 2013
              • 21
              #4
              Re: Help! KM Bizhub C253 error code C-0204

              Originally posted by lastdays
              Hello

              I still receiving this error message and I cannot print. I already checked tray 2 and is clean and ok. I`m using A3 paper for newspaper in this tray. Anybody can help me please?
              Sorry for the brain..... figured it out.

                Comment

                Previous template Next
                Working...