quality problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jokacross
    Trusted Tech
    • Nov 2010
    • 110

    quality problem

    I have a problem in color copies. By taking several at once the first leaves and then the sound quality will be lost as it exits. What can do this? I can send a picture of this if you want thanks. Is a 450c
  • BIG PAPA
    Da Boss

    100+ Posts
    • Jan 2010
    • 234

    #2
    I would say that yes a picture is needed. Not sure what sound copies make and why it would be an issue. But a few more details and can probably give you some advise.
    sigpic

    Comment

    • jokacross
      Trusted Tech
      • Nov 2010
      • 110

      #3
      The 1st page is the 1st print and the 2second page is the print past 16th prints. If you don't understand tell please

      Thanks


      prblem c450.pdf

      Comment

      • BIG PAPA
        Da Boss

        100+ Posts
        • Jan 2010
        • 234

        #4
        When is the last time adjustments were ran? If you are unsure do a reset and stabilize then run gradation adjustment as per manual.(at least 3X per setting).
        sigpic

        Comment

        • jokacross
          Trusted Tech
          • Nov 2010
          • 110

          #5
          can you explain me all the steps to do that? You have a pdf explaining that? thanks a lot

          Comment

          • stevelau
            Technician
            • Jul 2010
            • 21

            #6
            believe you need to redo the gamma & gradation adjmt. It will improves the print. Suggest you to do the toners replenishment(CMYK) before doing all this adjustment.

            Comment

            • jokacross
              Trusted Tech
              • Nov 2010
              • 110

              #7
              every thing is all right now. Thanks a lot for all your replys very very much!. My machine right now is very good quality.

              Comment

              Working...