konica C353

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • acsolutions
    Senior Tech
    500+ Posts
    • Jun 2010
    • 519

    konica C353

    Hello trying to re-chip transfer unit, Will not reset! replaced transfer unit and checked contacts. machine to transfer unit contacts ok. Fuse never blows! placed old unit in with new fuse with no change! any suggestions. Thanks
    Last edited by acsolutions; 07-20-2011, 05:01 AM.
  • dallas
    Trusted Tech
    100+ Posts
    • Jun 2008
    • 115

    #2
    Re: konica C353

    Check the CN33 (2-pin) connector on the PRCB for 24V DC.
    Sometimes it was not connected from factory.
    It opens the fuse in the Transfer Belt Unit.

    Comment

    Working...