C280 Black Issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jarwil
    Technician

    50+ Posts
    • Jun 2009
    • 61
    #1

    C280 Black Issue

    Have a c280 with Black issues.

    Has p-9 and p-21 errors. Also has had a couple of C2557 errors.

    Black hardly prints on the page.

    Black drum, developer and itb have been swapped out to no effect.

    toner is getting to the black developer tube but not going any further.

    Any ideas would be great. Thanks
    Tags: black, c2557, couple, developer, drum, errors, issue, itb, page, prints
    • habik
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 2014
      #2
      Re: C280 Black Issue

      Have you tried toner replenish in service mode for Black?

      Is there enough toner in cartridge? Is it OEM cartridge?

      Are the motors for dev. turning?
      .OK Google! ... will I need Berrocca this morning?
      Firmwares HERE

        Comment

        • tech51
          Senior Tech

          500+ Posts
          • Jan 2009
          • 846
          #3
          Re: C280 Black Issue

          Make sure the dev unit is rotating .There is a clutch for the black developer unit. These have been known to fail. This would explain why the toner feeds from the hopper but doesnt go into thr dev unit.
          The clutch is mounted on the drum drive unit but is available as a spare part.....

            Comment

            • jarwil
              Technician

              50+ Posts
              • Jun 2009
              • 61
              #4
              Re: C280 Black Issue

              Originally posted by habik
              Have you tried toner replenish in service mode for Black?

              Is there enough toner in cartridge? Is it OEM cartridge?

              Are the motors for dev. turning?
              Tried toner replenish in service mode. Tube of developer fills but goes no where.

              Toner cartridge seems like there is enough in there and is also a konnica toner.

              Not sure about drive but that is my next stop. Will swap out black dev clutch and then try HV board if that doesn't work.

              Will keep you posted.

              Thanks for suggestions

                Comment

                • jarwil
                  Technician

                  50+ Posts
                  • Jun 2009
                  • 61
                  #5
                  Re: C280 Black Issue

                  UPDATE

                  Replaced the Black Dev Clutch and has fixed the issue. P codes have gone and black printing fine.

                  Thanks for your help

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22698
                      #6
                      Re: C280 Black Issue

                      jarwil: what part number did you order? I don't see the bulletin. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • jarwil
                          Technician

                          50+ Posts
                          • Jun 2009
                          • 61
                          #7
                          Re: C280 Black Issue

                          I grabbed the clutch out of another machine. But it had a part number of A0EDM20000 on it.

                          If you look in the parts manual in the main drive unit there is another clutch there with the same part number.

                          Have ordered 2 of these clutches for the other machine and one for stock.

                          Hope this info helps.

                            Comment

                            Previous template Next
                            Working...