Bizhub C451 Setup Instructions

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jimmyjwc
    Junior Member
    • Jun 2011
    • 7
    #1

    [Misc] Bizhub C451 Setup Instructions

    Hi guys

    Can anyone help me with C451 setup instructions? Had to replace MFPB and can't remember the setup sequence!

    Thanks.
    Tags: bizhub, bizhub c451, c45, c451, instruction, instructions, mfpb, replace, sanitize, sequence, setup
    • copytechman
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2008
      • 929
      #2
      Re: Bizhub C451 Setup Instructions

      If the mfp board was changed on it's own, you shouldnt have to go through the setup sequence. Assuming you're using the nvram from the original board of course!


      Regards!
      A.

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Re: Bizhub C451 Setup Instructions

          Just in case...remove screws ( many many screws) pull out old board...put in new board...Waiting for a HDD to sanitize, so, way too much time on my hands...BTW you may want to have firmware available if replacement board came out of anything other that the C451. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            Previous template Next
            Working...