Bizhub Fuser Rebuilds? C350/C351

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mrfuser
    Service Manager
    Site Contributor
    1,000+ Posts
    • May 2007
    • 1566

    Bizhub Fuser Rebuilds? C350/C351

    Does anyone know of any companies that do advance exchange fuser rebuilds for konica bizhub c350/351 series? I know these are sold as complete units, but someone must have figured out the rollers by now.


    Thanks all!

    Kelly
  • b3p0
    Technician
    50+ Posts
    • Feb 2012
    • 60

    #2
    Re: Bizhub Fuser Rebuilds? C350/C351

    I see this is a bit old, but did you ever find anyplace to rebuild the c350/450 fuser?

    I have a pile of them I've been hanging onto hoping that I'd find a use for them.

    Comment

    • gendeh

      #3
      Re: Bizhub Fuser Rebuilds? C350/C351

      Originally posted by b3p0
      I see this is a bit old, but did you ever find anyplace to rebuild the c350/450 fuser?

      I have a pile of them I've been hanging onto hoping that I'd find a use for them.
      I'm in need of a c350 fuser, you still have any?

      Comment

      • methogod
        Senior Tech
        Site Contributor
        500+ Posts
        • Dec 2008
        • 913

        #4
        Re: Bizhub Fuser Rebuilds? C350/C351

        I have tried it, i think there are kits around, there a pain, not worth the time - think of the the BH 350 fuser, to many clips used instead of springs.

        also the gears wear unevenly so unless you get get them from used fusers as well it becomes another issue.

        Comment

        • mrfuser
          Service Manager
          Site Contributor
          1,000+ Posts
          • May 2007
          • 1566

          #5
          Re: Bizhub Fuser Rebuilds? C350/C351

          I can tear them down and put back together within an hour easy. Just can't find the rollers to replace. What a waste to toss them and fill up the dump!

          SOMEONE must have compatible rollers for these, maybe used in a different model, but same roller.


          Kelly

          Comment

          • blazebusiness
            SanDiegoCopierRepair.com
            Site Contributor
            1,000+ Posts
            • Apr 2010
            • 1246

            #6
            Re: Bizhub Fuser Rebuilds? C350/C351

            Originally posted by mrfuser
            I can tear them down and put back together within an hour easy. Just can't find the rollers to replace. What a waste to toss them and fill up the dump!

            SOMEONE must have compatible rollers for these, maybe used in a different model, but same roller.


            Kelly
            For other brand names there are many options..... But as much as I like the Konica Minolta brand ...... No options for fuser rebuild parts on most of the mid range machines. Only on the high end biz hub pro series.
            sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

            Comment

            • denver_touch_systems

              #7
              Re: Bizhub Fuser Rebuilds? C350/C351

              Hi!

              Does anyone still have old fusers laying around for the C351? I need one. Thanks! Dave.

              Comment

              Working...