C652 No drum reset

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • suomi
    replied
    Re: C652 No drum reset

    did not help but still running. B IU counter is over 11000...

    Leave a comment:


  • stefanv
    replied
    Re: C652 No drum reset

    Had same problem!!!! Check cn32 on PRCB for proper connection....

    Leave a comment:


  • EarthKmTech
    replied
    Re: C652 No drum reset

    Ahh, that proceedure is for the belt and fusing unit. The drum is provided with a "new article detection device"

    Leave a comment:


  • suomi
    replied
    Re: C652 No drum reset

    yes if you change fusing unit or transfer belt. But NOT drum...

    Leave a comment:


  • emujo
    replied
    Re: C652 No drum reset

    Most likely you have not followed the instructions properly...the front door must be open when you do the reset. Emujo

    Leave a comment:


  • Gaffers01
    replied
    Re: C652 No drum reset

    Check that there are no "P" codes up, as I think if there is the drum will not reset.

    Leave a comment:


  • EarthKmTech
    replied
    Re: C652 No drum reset

    Make sure the pins arent bent on the dv unit that contact the drum chip.

    Had this happen before when inexperienced tech replaced drum cart in a ham fisted manner

    Leave a comment:


  • JustManuals
    replied
    Re: C652 No drum reset

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Leave a comment:


  • suomi
    started a topic C652 No drum reset

    C652 No drum reset

    2 New black drum unit tested & no reset drum counter!!!
    Last edited by suomi; 04-10-2012, 09:27 AM.
Working...