Konica Minolta Stucked on "Copier is Warming Up"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Maindron1
    Technician

    Site Contributor
    • Mar 2011
    • 38
    #1

    Konica Minolta Stucked on "Copier is Warming Up"

    Hi, I just changed the M4 motor because I kept getting a J32-01 jam code and after I put everything together, the copier will not go pass the warming up part, it is stucked there and will go on ready.

    Please help.

    I am sorry, It is a Konica 7155.
    Last edited by Maindron1; 05-29-2012, 10:43 PM.
    Tags: None
    • n edwards
      #2
      Try thermistors, but most likely a fuser lamp has blown - bell out lower lamp and all 3 upper lamps individually -btw did m4 motor fail? I normally clean/replace the 3x 'm' one way gears for a 3201 error?

        Comment

        • empiru
          Trusted Tech

          100+ Posts
          • Feb 2011
          • 229
          #3
          Re: Konica Minolta Stucked on "Copier is Warming Up"

          I've got a car (won't tell you what model) that won't start. Can you help me?
          I don't help end-users. Hate me, give me bad reputation, I don't give a rat's a**. Pay a tehnician to solve your problem! We have to live too! What do you do when something hurts? Do you go to a doctor, or do you search it on google/ forums?

            Comment

            • kyrenecopy
              Trusted Tech

              100+ Posts
              • Apr 2012
              • 205
              #4
              Re: Konica Minolta Stucked on "Copier is Warming Up"

              Double check and make sure you plugged everything back in that you removed when you replaced the motor. Make sure you didn't accidentally pull/knock off a plug.

              NVRAM can cause this, check all your optional equipment to make sure they are ok. Reinstall any options you may have removed.
              Testing 1-2-3, testing, testing. Is this thing on?

                Comment

                • Maindron1
                  Technician

                  Site Contributor
                  • Mar 2011
                  • 38
                  #5
                  Re: Konica Minolta Stucked on "Copier is Warming Up"

                  Originally posted by empiru
                  I've got a car (won't tell you what model) that won't start. Can you help me?
                  I am sorry, It is a Konica 7155.

                    Comment

                    • mrwho
                      Major Asshole!

                      Site Contributor
                      2,500+ Posts
                      • Apr 2009
                      • 4299
                      #6
                      Re: Konica Minolta Stucked on "Copier is Warming Up"

                      Some tips:

                      DESCRIPTION: Intermittent J32-01.
                      CAUSE: The paper exit driving gear (p/n 56AA77220) is installed backwards. This gear has a one-way bearing.
                      SOLUTION: Install the paper exit driving gear so the the shaft is driven when the gear is turned counterclockwise

                      DESCRIPTION: J32-01 when running face up mode. Paper stops in the inversion unit.
                      CAUSE: The gate switching mechanism on the reverse gate solenoid (SD7) has disconnected which puts the reverse gate in face down mode at all times.
                      SOLUTION: Remove SD7 and reinstall the switching mechanism to allow proper operation.

                      DESCRIPTION: COPIER WARMING UP, PLEASE WAIT AWHILE message and the machine never goes to a ready condition. The fuser lamps are ON and cycling properly.
                      CAUSE: The ADU board has failed.
                      SOLUTION: Replace the ADU board

                      Not saying that one of these is the surefire solution for your problems, but are things you might check out.
                      ' "But the salesman said . . ." The salesman's an asshole!'
                      Mascan42

                      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                      Ibid

                      I'm just an ex-tech lurking around and spreading disinformation!

                        Comment

                        • JustManuals
                          Field Supervisor

                          5,000+ Posts
                          • Jan 2006
                          • 9838
                          #7
                          Re: Konica Minolta Stucked on "Copier is Warming Up"

                          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

                          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


                          Paul@justmanuals.com

                            Comment

                            Previous template Next
                            Working...