I took a call today on a K920 with a FS-516 finisher. Another tech had taken the call on Monday. He ordered a Finisher control board. Well he went on vacation and I was asked to put it on. Needless to say when I put it on I got a SC 77-98 (no firmware on finisher). I flashed the finisher with Version 30(version that was on the previous board.) and the code went away.
The copier came back up and came ready to copy. The original problem was still there. Machine is not recognizing the finisher, and the finisher does not intialize. It was late in the day, so I didn't have a chance to look further. I am thinking that there is nothing wrong with the finisher, but with the machine. I am thinking along the line of no 24V, or 5V. Going to troubleshoot that in the morning. Any other possible leads that any one can give me would be appreciated.
The copier came back up and came ready to copy. The original problem was still there. Machine is not recognizing the finisher, and the finisher does not intialize. It was late in the day, so I didn't have a chance to look further. I am thinking that there is nothing wrong with the finisher, but with the machine. I am thinking along the line of no 24V, or 5V. Going to troubleshoot that in the morning. Any other possible leads that any one can give me would be appreciated.
Comment