Using bizhub C352 Consumables in C250

[PeterG]

Re: Using bizhub C352 Consumables in C250

what could possibly come in handy from them ? I might just take them to the dump.

Everything, approximately 1 day after you dispose of them.

[EarthKmTech]

Re: Using bizhub C352 Consumables in C250

identical, except for the different colour casing and the c352 adf has an LED bar on it

I have half a dozen DF611's & c452 series adf's sitting in my shed for parts ive only ever taken 1 part from them, the black plastic duplex gate and solenoid.

what could possibly come in handy from them ? I might just take them to the dump.

[kingarthur]

Re: Using bizhub C352 Consumables in C250

we have been using C352 consumables in a C250 for about a year now, we discovered this when the customer was given the wrong toner & fitted it, the transfer belts are the same. Another thing i've just discovered, the RADF on the C352 & C203 are also identical, check the parts book, so i'm robbing bits from our old RADFs now.

[EarthKmTech]

Re: Using bizhub C352 Consumables in C250

i've accidentally put a c250 transfer belt inside a c352 in the past, only realizing when id turned the machine on, half expecting some kind of error code or print quality issue.

it worked perfectly, so i would assume vise versa would work too.

[MFPs R Now PCs]

All of the image units (I/U) in a Konica Minolta bizhub C352 look identical to the I/U's in the bizhub C250.

If I chip a new C352 I/U properly, can I use in the C250?

What about using a C352 transfer belt in the C250 with the proper fuse reinstalled?

Thanks in advanced!