c650 controller

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Synaux
    replied
    Re: c650 controller

    Thanks for the manual Paul

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    Originally posted by manuals4you
    I have the IC-409 Fiery Service guide, got something to trade? Or email me and I'll give you a break on the price.

    Paul

    Leave a comment:


  • JustManuals
    replied
    Re: c650 controller

    I have the IC-409 Fiery Service guide, got something to trade? Or email me and I'll give you a break on the price.

    Paul

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    I just ran accross this in
    SSD Support Solutions
    IC-409: All Active Solutions
    March 2011
    Pages 41-53

    IC-409 POST Code List (I attached a pdf)


    Funny how things present themselves when you are looking for them
    Attached Files

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    Originally posted by Albonline
    here is a list
    Good stuff, thanks

    Leave a comment:


  • Mr Spock
    replied
    Re: c650 controller

    Originally posted by Albonline
    here is a list
    This is the one I was looking for but could not find. More codes then the other one.

    Leave a comment:


  • Albonline
    replied
    Re: c650 controller

    here is a list
    Attached Files

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    Originally posted by Mr Spock
    check this out.
    Thanks, I feel much smarter now!

    The codes that I am getting aren't in the list, but I only notice them during working operation...

    As you hinted and stated in the manual "Any other code not listed: Motherboard is faulty."
    I really doubt that is this case (for today). The capacitors are good and it works very well 95% of the time.

    The 409 needs to be restarted often; however, I do recall reading something about a patch for these controllers when they can't come out of standby.

    It will also do some strange things. Sometimes immediately after the copier is turned off the Fiery turns off. Also, I have noticed that sometimes the Fiery will turn off when the copier is on too.

    I assumed this is some sort of standby/power saving, but there doesn't seem to be any rhyme or reason to when it actually does this.

    Anyways, if I can't get the patch that I believe exists, I will probably start a new thread.

    Thanks again, Mr. Spock

    (sorry for rambling)

    Leave a comment:


  • Mr Spock
    replied
    Re: c650 controller

    check this out.
    Attached Files

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    Originally posted by Mr Spock
    I have found these only in the ic-408 manual. None of the others seem to have it. These should be the same across most of the models.
    Ugh, I don't have any documentation for the IC-408.... :/

    Leave a comment:


  • Mr Spock
    replied
    Re: c650 controller

    I have found these only in the ic-408 manual. None of the others seem to have it. These should be the same across most of the models.

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    Originally posted by Mr Spock
    You will need the ic service manual. It has them in it. It also says that any not listed means the system pwb is suspect!
    Thanks Mr Spock.
    Are there two service manuals...because I have one and I almost certain they are not in mine.
    Maaaaybe you could give me a page number or email/post the few pages with codes?

    Leave a comment:


  • Mr Spock
    replied
    Re: c650 controller

    You will need the ic service manual. It has them in it. It also says that any not listed means the system pwb is suspect!

    Leave a comment:


  • Synaux
    replied
    Re: c650 controller

    **bump** Seriously? Nobody knows the meanings of the controller codes? I find it very strange that there is no documentation on them...

    Leave a comment:


  • Synaux
    started a topic [Error Code] c650 controller

    c650 controller

    This c650's controller (IC 409, I think....I can look it up though) keeps showing codes at random times like F3 and 03.
    I have several manuals for these controllers and similar models, but I cant seem to find a break-down of what the codes themselves denote.

    Thanks guys!
Working...