(We were going to throw this machine, and ten other C20/C20P's in the trash, I "borrowed" one to have at home)
Bad move on my part, it seems. Couldn't be arsed checking the state of it at the office, lugged it up to my place "blind", so to say. Started out with it locked because of the yellow IU life. Snatched one of those from a scrapped one at the office. Started it up, B/W prints are excellent. Color on the other hand...
First of all, image quality is horrible. Wrong colors, the magenta stripes I mentioned in the title...
I have very limited to no experience with these small printers, the smallest machines I work on are the C451s. The smaller the machine, the bigger the trouble it seems.
However small or large I crop this image it look humongous. Excuse that.
Well, there's a picture of the belt with the magenta stripes. Also, a picture I tried printing. What's yellow in the pic should be grayish-white. The blue part, more green.
It's most likely the laser and/or PRCB, but I could use some verification before trying to steal some more things.
So, am I at a bust with this machine, because I can't be arsed shelling out cash for a new belt, laser or board/boards. And we've scrapped the other machines, all but one.
Regards,
Avskrap
Bad move on my part, it seems. Couldn't be arsed checking the state of it at the office, lugged it up to my place "blind", so to say. Started out with it locked because of the yellow IU life. Snatched one of those from a scrapped one at the office. Started it up, B/W prints are excellent. Color on the other hand...
First of all, image quality is horrible. Wrong colors, the magenta stripes I mentioned in the title...
I have very limited to no experience with these small printers, the smallest machines I work on are the C451s. The smaller the machine, the bigger the trouble it seems.
However small or large I crop this image it look humongous. Excuse that.
Well, there's a picture of the belt with the magenta stripes. Also, a picture I tried printing. What's yellow in the pic should be grayish-white. The blue part, more green.
It's most likely the laser and/or PRCB, but I could use some verification before trying to steal some more things.
So, am I at a bust with this machine, because I can't be arsed shelling out cash for a new belt, laser or board/boards. And we've scrapped the other machines, all but one.
Regards,
Avskrap
You should not play the lottery, the luck is not your strongest point 
Comment