I could not find a bulletin on the clutches being bad. the black feed clutches.
anyone have a copy of that bulletin?
brent
anyone have a copy of that bulletin?
brent
-
-
Re: bizub 423 feeding problem
I can't say that I've heard anything on this topic.
I've got machines with 800K, no feed issues other than the usual wear & tear on rollers.
How about one-way bearings? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
In reference to your last post, no one said there was an official mea culpa just a known issueComment
-
Re: bizub 423 feeding problem
There was a note in the training material for the C360 series ( same clutches ). Saying that replacement clutches are greased to prevent rusting and this grease must be cleaned out with alcohol before installing or they will fail prematurely.Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI BoxesComment
Comment