bizhub 920 pro

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NEOTECH
    Technician
    50+ Posts
    • Dec 2010
    • 69

    [Misc] bizhub 920 pro

    hi everyone i have a problem in adf for bizhub 920 pro sc 60-03 i replace adf board but now problem is when i make copy in adf paper was exit in adr try but adf motors still rotating and copy not come out i open copier side door machine will stop and i found paper there i cant under stand what happen with this machine. if any one have a idea plz help me.
  • RRodgers
    Service Manager
    1,000+ Posts
    • Jun 2009
    • 1950

    #2
    Re: bizhub 920 pro

    Sounds like you missed a connector to me.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

    Comment

    • methogod
      Senior Tech
      Site Contributor
      500+ Posts
      • Dec 2008
      • 913

      #3
      Re: bizhub 920 pro

      I have brand new ADF units if you need one.

      Comment

      • KM7155
        Trusted Tech
        • Aug 2008
        • 145

        #4
        Re: bizhub 920 pro

        was the leading edge hit something? if not, i would bet the paper path sensor faulty.

        Comment

        • methogod
          Senior Tech
          Site Contributor
          500+ Posts
          • Dec 2008
          • 913

          #5
          Re: bizhub 920 pro

          i would check i/o mode sensors on DF.

          also make sure its not a odd firmware issues, that may have been fixed in a later version. New-board may be old firmware.


          Re-seat cables, i would make a copy form the glass, make sure nothing is wrong anywhere else.


          When you replaced board, did you unplug from wall? i have seen weird stuff with older machines, when adding/replacing parts or consumables while power is on.

          Comment

          • Mick01
            Trusted Tech
            250+ Posts
            • Nov 2012
            • 362

            #6
            Re: bizhub 920 pro

            Did you do the ADF sensor sensitivity adjustment when you replaced the board? In the service manual there is a "List of Adjustment Items" when replacing a part. It outlines what adjustments need to be made and in what order.
            Hope this helps.

            Comment

            Working...