ineo/BH 363 sandy output

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • inutelkamo
    Trusted Tech

    100+ Posts
    • Jul 2011
    • 143
    #1

    ineo/BH 363 sandy output

    good day..

    i have an ineo 363, copycounter is at almost 1.2M..
    now, i change new drumkit, edeveloper,drum and dev unit..

    the problem is,
    the output is sandy..
    sandy not in image, but if i touch the output, i can scraped uncook developer like sand..
    what cause this? any sugestion and adjustments??

    in bh350, i change the incandescent lamp unit at the back of IU..
    but in parts manual, i cant find that item on 363..

    thnx...
    Tags: back, change, good, image, incandecent, lamp, manual, parts, touch, unit
    • EarthKmTech
      Step aside, noob

      1,000+ Posts
      • May 2009
      • 2139
      #2
      Re: ineo/BH 363 sandy output

      there shouldn't be developer on the paper at all. Was this problem present prior to changing the complete imaging unit ?

      Assuming the correct parts were used, I suspect possibly a faulty developing unit or the developing sleeve hv connection has come adrift - if this problem wasn't there before, although you would also notice very poor print quality too. I saw this problem just yesterday oddly enough.

        Comment

        • inutelkamo
          Trusted Tech

          100+ Posts
          • Jul 2011
          • 143
          #3
          Re: ineo/BH 363 sandy output

          yes.. this problem was already in the old IU set..
          that why i decided to change the whole iu set since it reach its normal count..

          but still, sandy output..
          im looking for the erase lamp in the parts manual but i cant find it..
          in 350, this problem was solved when i change the incandecent lamp behnd the IU..

            Comment

            • EarthKmTech
              Step aside, noob

              1,000+ Posts
              • May 2009
              • 2139
              #4
              Re: ineo/BH 363 sandy output

              Originally posted by inutelkamo
              yes.. this problem was already in the old IU set..
              that why i decided to change the whole iu set since it reach its normal count..

              but still, sandy output..
              im looking for the erase lamp in the parts manual but i cant find it..
              in 350, this problem was solved when i change the incandecent lamp behnd the IU..
              If it were me, i would be checking the HV contacts in the machine and changing the HV board. I haven't looked but i doubt anything half way modern uses incandescent erase lamps anymore. LED's are standard now and virtually never fail at all.

                Comment

                • inutelkamo
                  Trusted Tech

                  100+ Posts
                  • Jul 2011
                  • 143
                  #5
                  Re: ineo/BH 363 sandy output

                  Originally posted by EarthKmTech
                  If it were me, i would be checking the HV contacts in the machine and changing the HV board. I haven't looked but i doubt anything half way modern uses incandescent erase lamps anymore. LED's are standard now and virtually never fail at all.
                  thats what im thinking.. cant find any incandescent anymore..
                  were having slow responses on parts here...
                  clients are already mad...
                  grrrrr

                    Comment

                    Previous template Next
                    Working...