bizhub 161f restar itself

[mazskingdom]

Good morning

Could you guys help me out please - this little guy when I turn it on it start to do the warm up - moves the rollers, test the scanner light for about 8 sec and after just a click and shuts off and restart the procedure again - of course no print or copy can be done and no error code. Any hint or idea would be well appreciated - thanks

[rocky246]

Need to replace PWB-P. #4980-1019-01.

[mazskingdom]

Thank you

[mazskingdom]

did not worked

Ive tried to change that board - still the same now it is even wont start and restart itself but just clicking. If I turn it off for a period of time it is starts the boot sequence but after just clicking. Any other idea? -I have heard it is a very common problem with this machines and nobody knew the solution yet. Something probably overheating but no idea yet what it is
please help if anyone have any idea
thanks

[Ronald]

B161F -Switching On/Off

We have endless problems with these models. We have tried all but with no success. We now remove the PCL controller and use the B160F Driver. The only success.