C451/550/650 webtool time out

[toly]

On all installation the last few month i have discovered that when you are using webtool the machine disconnect after very short time.
any ideas where this timer is set up?

[nmfaxman]

Administrator mode.
Default code is 00000000.
Look for timers and set them all to 240, except for panel reset time.

[toly]

Admin code is 12345678

[konisolver]

There is no way to set the timer for this timeout. The only solution for this is to log-out and make sure to select HTML instead of flash. This also eliminates the "socket error" on the screen.

[toly]

Sounds like an ok solution, thanks