Kyocera vs Konica minolta?

[Supertech]

Re: Kyocera vs Konica minolta?

konica for colour, kyocera for b/w

I agree with you 100% as far as output quality is concerned but the newest Kyocera color boxes are pretty good (I'm talking about the TASKalfa 3551ci/4551ci/5551ci models, their console models still suck balls)

I've wanted to make a youtube video of replacing feed rollers side-by-side on a Kyocera and Konica. The Kyo video would end at about 29 seconds, Konica 11 minutes. I'm pretty sure I could actually install a Kyocera PM kit quicker than replacing Konica feed rollers. Konica has lots of firmware bugs and board failures. When I worked on Kyocera a few years ago this was very very rare.

Kyocera is a much more tech friendly box to work on for almost the entire product line.

[JR2ALTA]

Re: Kyocera vs Konica minolta?

I've wanted to make a youtube video of replacing feed rollers side-by-side on a Kyocera and Konica. The Kyo video would end at about 29 seconds, Konica 11 minutes.

I'm pretty sure I could actually install a Kyocera PM kit quicker than replacing Konica feed rollers.


Konica has lots of firmware bugs and board failures. When I worked on Kyocera a few years ago this was very very rare.

[Max]

Re: Kyocera vs Konica minolta?

konica for colour, kyocera for b/w

[T_foot2]

Anyone work on both the Kyocera and the Konica-Minolta lines? Which do you prefer to work on? is one easier than the other?