BIZHUB 754E C-1141

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jujitsu47
    COPIER TECH SPECIALIST
    • Jun 2014
    • 19

    [Jamming] BIZHUB 754E C-1141

    C-1141 Intermintently jams, any ideas would be appreciated....
  • EarthKmTech
    Step aside, noob

    1,000+ Posts
    • May 2009
    • 2142

    #2
    Re: BIZHUB 754E C-1141

    And you've done what so far ?

    And what finisher is installed ?

    Comment

    • laitang
      Senior Tech

      500+ Posts
      • Nov 2012
      • 627

      #3

      Comment

      • jujitsu47
        COPIER TECH SPECIALIST
        • Jun 2014
        • 19

        #4
        Re: BIZHUB 754E C-1141

        Originally posted by EarthKmTech
        And you've done what so far ?

        And what finisher is installed ?
        FS-534 and not much, its daily and often but not every copy? ck'd sensors and motor in service mode

        Comment

        • habik
          Service Manager

          Site Contributor
          1,000+ Posts
          • Apr 2010
          • 2014

          #5
          Re: BIZHUB 754E C-1141

          Originally posted by jujitsu47
          FS-534 and not much, its daily and often but not every copy? ck'd sensors and motor in service mode

          Re- # sensors NOT in service mode!

          I had one which was OK in Service mode I/O check and day later it wasn't OK in I/O check..

          so sensor out and meter out!
          .OK Google! ... will I need Berrocca this morning?
          Firmwares HERE

          Comment

          • giddyupngo
            Trusted Tech

            100+ Posts
            • Oct 2014
            • 109

            #6
            BIZHUB 364e with FS-534

            Hi, just wanted to mention I had this code today, after taking apart the FS-534 finisher, there was excess white grease on the timing wheel, which got into the PS14. Replaced sensor and tested OK. However strangely enough in Service mode the state of PS14 didn't change from 0 to 1. However running the paddle motor in Service mode worked.
            PS14.pdf

            Comment

            • bronco31
              Trusted Tech

              Site Contributor
              100+ Posts
              • Aug 2009
              • 174

              #7
              Re: BIZHUB 364e with FS-534

              Originally posted by giddyupngo
              Hi, just wanted to mention I had this code today, after taking apart the FS-534 finisher, there was excess white grease on the timing wheel, which got into the PS14. Replaced sensor and tested OK. However strangely enough in Service mode the state of PS14 didn't change from 0 to 1. However running the paddle motor in Service mode worked.
              [ATTACH]34117[/ATTACH]

              i cant find the Load Check in the BH808 Service manual for running M5, the paddle motor.. in the FS=536 finisher?

              Comment

              Working...