C554e job doesnt start printing until the machine receives the entire job

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • habik
    replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    In my experience the solution to MS office stapling multiple copies of the same doc as one bunch is to uncheck the Collate box in printer dialog. Simple as that! MS office= Logics out! Or Think out of the box! Pun intended!


    Sent from my iDon't believe in marketing device using Tapatalk

    Leave a comment:


  • Hansoon
    replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    So what was the solution, the "Start printing immediately" thing?

    Hans

    Leave a comment:


  • vinnysamways
    Guest replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    Thanks for all your help guys, all sorted now!

    Leave a comment:


  • D Colour
    replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    In printer properties, under advanced, make sure "Start printing immediately" is selected rather than "Start printing after last page is spooled."

    Leave a comment:


  • TheOwl
    replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    Mail merges sent from the Office suite are always treated as one job. You will also find that if you go to staple as well, the device will try to staple the entire print run.

    Below is a macro that I have been using for years which should get you out of trouble.

    Mail Merge.pdf

    Leave a comment:


  • sauce_boss
    replied
    Re: C554e job doesnt start printing until the machine receives the entire job

    Give this a shot

    Solution ID
    2
    Solution Usage
    TAUS0703717EN*
    Description
    All duplex jobs spool completely before starting to print.
    Solution
    CAUSE: Paper Arrangement is set to Prioritize Arranging Papers under the Finish tab in the driver.
    SOLUTION: Set the Paper Arrangement to Prioritize Productivity. If speed is an issue this should be set as the default.

    Leave a comment:


  • C554e job doesnt start printing until the machine receives the entire job

    When printing a mail merge word document to a Bizhub C554e it would appear the job does not start printing until the device has received the entire job. It also looks like as soon as we select duplex on the job the size of the job increases 10 fold??
Working...