Bizhub C754 Cyan IU Failing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MVPunisher
    Trusted Tech

    Site Contributor
    100+ Posts
    • May 2013
    • 209

    #1

    Bizhub C754 Cyan IU Failing

    The Cyan IU keeps failing shortly after putting it in. The middle of the page becomes washed out. Today I will check the waste toner box to see if DV is being pulled. Did not check this before as I was just suspecting a faulty IU.

    I am thinking HV unit>? any suggestions appreciated. Thanks.
  • Avind
    Junior Member
    • Jun 2018
    • 6

    #2
    Re: Bizhub C754 Cyan IU Failing

    I have a question about C754 IU...just installed a new OEM Magenta IU and the counter in the service menu is 0 as it should be, but the percentage in the Consumable Life is 99%. Why? Do I have to reset or initialize something when I put the new IU in?

    Comment

    • mincopier
      Trusted Tech

      250+ Posts
      • Dec 2015
      • 290

      #3
      Re: Bizhub C754 Cyan IU Failing

      Toner hopper not adding toner to the developer unit. Could also be the mothers in the back not turning the hopper, toner, or DV unit.

      Comment

      • Phil B.
        Field Supervisor

        10,000+ Posts
        • Jul 2016
        • 22798

        #4
        Re: Bizhub C754 Cyan IU Failing

        Originally posted by Avind
        I have a question about C754 IU...just installed a new OEM Magenta IU and the counter in the service menu is 0 as it should be, but the percentage in the Consumable Life is 99%. Why? Do I have to reset or initialize something when I put the new IU in?
        good job reviving a 5 year old DEAD thread!

        Now start your own.. and please take note of the DATE of threads you want to post on.

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4546

          #5
          Re: Bizhub C754 Cyan IU Failing

          Originally posted by Avind
          I have a question about C754 IU...just installed a new OEM Magenta IU and the counter in the service menu is 0 as it should be, but the percentage in the Consumable Life is 99%. Why? Do I have to reset or initialize something when I put the new IU in?
          Simple, The counter in consumable life countdown, start (full) at 100% and empty at 0%

          Comment

          Working...