bizhub c360 reset chips

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brent
    Service Manager
    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1150

    bizhub c360 reset chips

    so I ordered some chips off a guy and are these really easy to swap out?
    there was supposedly instructions on his website.. but no dice..
    just was curious as I need to get this done today thanks
    brent
  • paulrid
    Trusted Tech
    100+ Posts
    • Nov 2011
    • 206

    #2
    Re: bizhub c360 reset chips

    Te chips on the drums are really easy, just pop out the drum and underneath is the chip just one small screw. If it's the dev unit it will depend on the reset device as the chip is the tcr sensor, as far as I know.
    You could just install the end of live firmware or even just activate it.
    Paul.

    Comment

    • brent
      Service Manager
      Site Contributor
      1,000+ Posts
      • Nov 2008
      • 1150

      #3
      Re: bizhub c360 reset chips

      I should have just looked first. easy as pie. just make sure to take a very very small Philips screwdriver. lol thanks
      brent

      Comment

      • Don N.
        Trusted Tech
        250+ Posts
        • Nov 2011
        • 408

        #4
        Re: bizhub c360 reset chips

        Keep catching myself saving a 70~90% chip for an emergency, like I used to do on C253 series. No sense saving a partial used chips on these. They only shake hands with one machine.

        Comment

        Working...