NOTICE: Users should expect a few periods of downtime this weekend while we work on a few updates to the system.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Have a customer who prints lots of color but every once in awhile the machine will only print in black and white, happens on copies, and even the demo page. I have replaced the NVram and that worked for awhile but now it keeps happening like every week. any ideas?
Replace Transfer Belt Retraction Clutch CL7 A02EM20000 PAGE/ITEM: 44/30
It's for for the pressure of the 1st Transfer rollers of CMY.
Have a customer who prints lots of color but every once in awhile the machine will only print in black and white, happens on copies, and even the demo page. I have replaced the NVram and that worked for awhile but now it keeps happening like every week. any ideas?
Leave a comment: