intermittent c0211 code on konica-minolta c280

[allan]

Re: intermittent c0211 code on konica-minolta c280

Are you sure its C-0211 and not C-C211.

Just asking because i had this code in this week ii mistook it for a C-0211.
If its the bypass tray lift sensor if would let the lift tray go up and down before it errors out. Or make noise if its mechanical.
look to see if something is not bent and that all the connectors ad wiring is OK.

[imihm]

Hello there.

We are having c0211 when printing from bypass.....just replaced the clutch and cleaned the sensor.....but no response,,,any ideas......????


Thanks a lot