Konica Minolta Bizhub 420 Background

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mearmi
    Trusted Tech

    Site Contributor
    250+ Posts
    • Oct 2010
    • 344

    [CQ] Konica Minolta Bizhub 420 Background

    Hi

    Got Bizhub 420, background on the copy/print when do duplex

    Single side copies/prints are fine.

    Replaced Drum Developer and Transfer corona assembly.

    Please advise

    Thanks and Kind Regards,

    Mearmi
    Last edited by mearmi; 06-24-2015, 10:52 AM.
  • kingarthur
    Service Manager

    1,000+ Posts
    • Feb 2008
    • 1183

    #2
    Re: Konica Minolta Bizhub 420 Background

    have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
    Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

    Comment

    • mearmi
      Trusted Tech

      Site Contributor
      250+ Posts
      • Oct 2010
      • 344

      #3
      Re: Konica Minolta Bizhub 420 Background

      Originally posted by kingarthur
      have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
      Thanks for your reply.

      No I didn't. Shall I increase the voltage? Or any default value?

      thanks

      Comment

      • mearmi
        Trusted Tech

        Site Contributor
        250+ Posts
        • Oct 2010
        • 344

        #4
        Re: Konica Minolta Bizhub 420 Background

        Originally posted by kingarthur
        have you played around with the voltages, from memory raising the transfer voltage helped....obviously make a note of all voltages before you start
        By increasing the transfer voltage, the problem is gone.

        thanks a lot for your help

        Kind Regards

        Mearmi

        Comment

        Working...