Machine powers up fine.......no error codes. Copy screen say "Ready to copy" If you try to make a copy the orange light on the front of the copier blinks/flashes and nothing happens. If you try to print from the computer when the copier display says ready to copy......same thing.....orange light blinks and nothing ever happens. No message appears (ie....like failed to complete job)
In the warning L-6 and L-4 codes are displayed indicating time to replace drum unit/developer. On this model......can the L-4/L-6 warnings disable the copier on this model? Or has a PCB failed. Signed on to KBMS and no bulletins found about this issue. In service mode there is no option to allow continued operation when Drum/developer is due.
In the warning L-6 and L-4 codes are displayed indicating time to replace drum unit/developer. On this model......can the L-4/L-6 warnings disable the copier on this model? Or has a PCB failed. Signed on to KBMS and no bulletins found about this issue. In service mode there is no option to allow continued operation when Drum/developer is due.