Mita Ai4040
I have recently received this machine. I am having some bad problems with it. I think in a past life it must have been dropped off a truck...
Paper feed from the drawer is good, when it hits the imaging unit it jams, but it has 1 out, 1 in the finisher... So it runs approx 4 shts then jams. It makes no sense why on 4 to me. I would have thought it would jam on the first sheet. Second problem, none of the sheets have an image on it?
Any suggestions would be helpful... if not if someone is interested it would be cheap if you come pick it up.
Heavy D
Paper feed from the drawer is good, when it hits the imaging unit it jams, but it has 1 out, 1 in the finisher... So it runs approx 4 shts then jams. It makes no sense why on 4 to me. I would have thought it would jam on the first sheet. Second problem, none of the sheets have an image on it?
Any suggestions would be helpful... if not if someone is interested it would be cheap if you come pick it up.
Heavy D