T/A 3500i doc feeder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • logrady2331
    Trusted Tech

    250+ Posts
    • Feb 2011
    • 301
    #1

    T/A 3500i doc feeder

    Hello all, I have a T/A 3500i that I got back on a lease return and bought it out so I could keep it for a rental. The copy count is right at 60k but the doc feeder has almost a million on it. Any suggestions on what I should replace besides the normal stuff (feed and sep, pick up, etc.) ?
    Tags: None
    • Santander
      Senior Tech

      Site Contributor
      500+ Posts
      • May 2009
      • 768
      #2
      Re: T/A 3500i doc feeder

      Originally posted by logrady2331
      Hello all, I have a T/A 3500i that I got back on a lease return and bought it out so I could keep it for a rental. The copy count is right at 60k but the doc feeder has almost a million on it. Any suggestions on what I should replace besides the normal stuff (feed and sep, pick up, etc.) ?
      We have had very few problems with these doc feeders, they are rock solid. Changing the normal items as you state, should suffice even with almost a million scans.

        Comment

        • eddie110171
          Service Manager

          100+ Posts
          • May 2012
          • 133
          #3
          Re: T/A 3500i doc feeder

          If you are prepping it to go out I would change the Torque Limiter, it is the piece that the Pulley Separation (commonly called the retard roller) fits over. I have had those go out several times on high count DPs. It will cause an intermittent multi-feed of pages in DP. IMHO

            Comment

            Previous template Next
            Working...