Kyocera M6235cidn color registration problem

[martinkrys]

image.png

[ihatefinishers13]

I had something like this on that model. Initially found the transfer unit was skipping, and that resolved a noise, but was still showing registration shift. After that, tech support told me to replace the main board. It was chargeable so the customer(inter-territorial) upgraded.

[blackcat4866]

How many times consecutively did you align it. I've had it take 15 times or more to get into range. =^..^=

[jtruz76]

Good morning martinkrys,
One of my co-workers ran into that. He contacted the Kyocera Technical Support hotline and they provided a reset file called...
Reset File For ColorShift(SN_RC1xxxxxxx).capt I personally have not tried this yet, but it worked for him. This system won't allow me to upload it because of the file type ".capt". I can email it to you if want. Send me a message to... cbijamest@gmail.com Attached are before and after samples that my co-worker sent to me last September.

[martinkrys]

How many times consecutively did you align it. I've had it take 15 times or more to get into range. =^..^=

6 times

[martinkrys]

Good morning martinkrys,
One of my co-workers ran into that. He contacted the Kyocera Technical Support hotline and they provided a reset file called...
Reset File For ColorShift(SN_RC1xxxxxxx).capt I personally have not tried this yet, but it worked for him. This system won't allow me to upload it because of the file type ".capt". I can email it to you if want. Send me a message to... cbijamest@gmail.com Attached are before and after samples that my co-worker sent to me last September.

I wrote You a message, thanks

[martinkrys]

I had something like this on that model. Initially found the transfer unit was skipping, and that resolved a noise, but was still showing registration shift. After that, tech support told me to replace the main board. It was chargeable so the customer(inter-territorial) upgraded.

fFirst of all, I thought it was just a transfer belt issue, which, by the way, was broken and made a lot of noise because of the worn bushing

[copier tech]

image.png

Try updating the firmware then run U468 if this model has that sim code ?

[martinkrys]

Try updating the firmware then run U468 if this model has that sim code ?

There is no sim 468 in a M6235cidn

[martinkrys]

How many times consecutively did you align it. I've had it take 15 times or more to get into range. =^..^=

You were right - I did 15 times manual color registration with extreme values and this resolved a problem. Btw, there is no reset FW or reset file for this type of machine

[KYO_OEM]

You has to ask kyo support for the reset *.capt file.
My *.capt file does not work on your systems because it`s depended to the first 3 digits from serialnumbers.
Send status page to your kyo tech und ask for registration reset file.

[eddie110171]

Have you tried aligning it manually? It takes a blue colored light to do it correctly.

[ntbann]

Have you tried aligning it manually? It takes a blue colored light to do it correctly.

Or use the camera on your phone. It makes so you can see the yellow in the blue.

[copykat93]

What process, or simulation are you using to manually adjust this registration?

[martinkrys]

What process, or simulation are you using to manually adjust this registration?

Under menu settings, You can chose between automatic and manual color registration adjustment