Utax 350ci clenaning belt problem

[avio2]

hello , anyone have disassembly and replace mechanism movement gear cleaning belt?????
(not inside the tranfert but in body meachine)
i have remove: engine pwb-main pwb-hvt-main drive but from rear don't look this!!!!!!!!!! azzo: (look pdf)
for remove this need work inside??

[KYO_OEM]

Re: Utax 350ci clenaning belt problem

look for KYO bulletin 2R4-0030(I155), page 15/16 or UTAX Bulletin #23B, page 14/15.
There you`ll find explanation for disassembling from toner supply assy. (15 pages!!)
Same procedure needed for exchange from belt cleaning drive gear, i have heard.
Never done by myself

[avio2]

Re: Utax 350ci clenaning belt problem

look for KYO bulletin 2R4-0030(I155), page 15/16 or UTAX Bulletin #23B, page 14/15.
There you`ll find explanation for disassembling from toner supply assy. (15 pages!!)
Same procedure needed for exchange from belt cleaning drive gear, i have heard.
Never done by myself

thank's asked to radaelli this morning after 3d , chek TB and dissasemby only 3 hours!!!!!!!!!!!!!!!!!!!!!
this is very very bad!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! , ingenier is idiot!!!! for my opinion!!!!!!!!!!!!!!!! and whit TB disassembly more parts not necessary to remove this!!!!!!!!!

[avio2]

Re: Utax 350ci clenaning belt problem

now 3 month for spare parts imho