Kyocera 5053ci f010

[AiAi]

Hello
i have Kyocera 5053ci with broken ssd gives error code f010 , and i have ssd from Kyocera 3252
HOw to make it work in 5053ci?
Any advice

[tmaged]

You have to format the hooked up to a PC, deleting the partitions. Formatting it in the machine will not work, as it will not remove all the program info specific to each MFP.

https://www.copytechnet.com/forum/te...0-error-6053ci

[AiAi]

So If i format ssd will work without fw update?

[tmaged]

I'm pretty sure you'll still need to load firmware as well, since some of it resides on the SSD.

[AiAi]

What if i try to take an image of ssd from another machine will work?
because I don't have fw

[Ropariva]

This may work for you as previously mentioned, but the hi speed machines used a 8gb ssd and the low speed were 32gb as the hi speed devices also had a HDD for storage. The size difference going from small to large may be overcome by the formatting and reloading of firmware, but it’s not something I’ve ever tried.

[AiAi]

done

I got ssd from 4007 and machine working well now
thanks to you all