DP-7160 not detected - Taskafa 2554ci

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sabbish
    Junior Member
    • Apr 2022
    • 8
    #1

    DP-7160 not detected - Taskafa 2554ci

    After some difficulty, I finally found the solution. The board of the Dp was short-circuited due to the incorrect positioning of a spring in the sheet inserting plate. It was upside down and touching the connector
    (sorry for the translation)

    Screenshot_20220427-170646_Xodo Docs.jpg
    The wrong position
    20220216_151041.jpg
    The good position

    20220216_151058.jpg
    Tags: inserting, plate, sheet, spring, translation
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      Re: DP-7160 not detected - Taskafa 2554ci

      Good catch!

      It didn't blow any other boards? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • sabbish
          Junior Member
          • Apr 2022
          • 8
          #3
          Re: DP-7160 not detected - Taskafa 2554ci

          No, miraculously

            Comment

            Previous template Next
            Working...